problem with my chainsaw?

i have a cs-3000 echo the problem i am having is that i getting gas coming out of the muffler an it wont turn on

Comments

3 Responses to “problem with my chainsaw?”
  1. Anthony says:
    July 29, 2009 at 8:34 pm

    the inlet valve in the cab is stuck open, causing fuel to keep flowing and not shut off once the carb is full. It consists of a pivoting lever working like a seesaw with a spring on one side and an Inlet Needle. If you want to attempt to repair this try this link. I have done this to all my blower and weedeater carbs at one time or another.

    http://www.drystacked.com/Walbro%20Carburetor%20Theory%20ebook1.pdf

  2. Lonnie M says:
    July 29, 2009 at 8:34 pm

    Check to see if you are getting a spark. It could be a problem with the on/off switch, the spark plug, or magneto.

  3. Victor F says:
    July 29, 2009 at 8:34 pm

    engine is flooded pull spark plug out and pull engine over to blow fuel out of cylinder.clean plug and try again make sure its all dry.


 
Powered by WordPress Lab