Comments on: What is the exact oil to gas ratio for a homelite super XI automatic chainsaw? http://www.chainsawexpress.com/what-is-the-exact-oil-to-gas-ratio-for-a-homelite-super-xi-automatic-chainsaw Tue, 07 Feb 2012 02:24:08 +0000 hourly 1 http://wordpress.org/?v=3.2.1 By: ROBERT T http://www.chainsawexpress.com/what-is-the-exact-oil-to-gas-ratio-for-a-homelite-super-xi-automatic-chainsaw/comment-page-1#comment-959 ROBERT T Fri, 14 Aug 2009 02:55:38 +0000 http://www.chainsawexpress.com/what-is-the-exact-oil-to-gas-ratio-for-a-homelite-super-xi-automatic-chainsaw#comment-959 That Ratio would be 32:1 Which means one quart of gas to one ounce of oil That Ratio would be 32:1

Which means one quart of gas to one ounce of oil

]]> By: M C http://www.chainsawexpress.com/what-is-the-exact-oil-to-gas-ratio-for-a-homelite-super-xi-automatic-chainsaw/comment-page-1#comment-960 M C Fri, 14 Aug 2009 02:55:38 +0000 http://www.chainsawexpress.com/what-is-the-exact-oil-to-gas-ratio-for-a-homelite-super-xi-automatic-chainsaw#comment-960 Model: XL AUTOMATIC -------------------------------------------------------------------------------- MANUFACTURED BY: HOMELITE CORPORATION PORT CHESTER, NEW YORK, U.S.A. SERIES OR ASSEMBLY NUMBER: YEAR INTRODUCED: 1965 YEAR DISCONTINUED: 1965 ENGINE DISPLACEMENT: 3.55 cu. in. (58.2 cc ) NUMBER OF CYLINDERS: 1 CYLINDER BORE: 1.8125 in. (46 mm) PISTON STROKE: 1.375 in. (34.9 mm) CYLINDER TYPE: Aluminum with chrome plated bore INTAKE METHOD: Reed valves MANUFACTURER ADVERTISED H.P.: not advertised WEIGHT : 13 lbs. 14 oz. (6.3 kg) OPERATOR CONFIGURATION: One Man operation HANDLEBAR SYSTEM: Rigid CHAIN BRAKE: none CLUTCH: Centrifugal DRIVE TYPE: Direct CONSTRUCTION: Die cast magnesium MAGNETO TYPE: Phelon or Wico breaker point system on early versions, solid state ignition on later production CARBURETOR: Tillotson HS-4D, 142A Walbro SDC Zama MAJOR REPAIR KIT: RK-23HS for Tillotson K10-SDC for Walbro MINOR REPAIR KIT: DG-5HS for Tillotson D10-SDC for Walbro AIR FILTER SYSTEM: Cellulose fiber element STARTER TYPE: Homelite automatic rewind OIL PUMP: Automatic with manual override OPERATING RPM: 6,000 IGNITION TIMING: 30 degrees before TDC. Mount stator plate as far clockwise as it will go on breaker point types BREAKER POINT SETTING: 0.015 in. (0.38 mm) FLYWHEEL/COIL AIR GAP: Position is fixed SPARK PLUG TYPE: Champion CJ6 SPARK PLUG GAP: 0.025 in. (0.63 mm) CRANKSHAFT MAIN BEARINGS: Caged needle roller FUEL TANK CAPACITY: 24.2 oz. (716 ml) FUEL OIL RATIO: 32:1 with Homelite oil RECOMMENDED FUEL OCTANE: Regular MIX OIL SPECIFICATION: Homelite chain saw mix oil CHAIN PITCH: 3/8 in. CHAIN TYPE: Homelite also Oregon 72 BAR MOUNT PATTERN: 14 link SHORTEST GUIDE BAR SUPPLIED: 16 in. (40 cm) LONGEST GUIDE BAR SUPPLIED: 24 in. (61 cm) COLOUR SCHEME: Homelite Red enamel PAINT CODES: ILLUSTRATED PARTS LIST: SERVICE MANUAL: -------------------------------------------------------------------------------- COMMENTS: -------------------------------------------------------------------------------- Model: XL AUTOMATIC

——————————————————————————–
MANUFACTURED BY: HOMELITE CORPORATION
PORT CHESTER, NEW YORK, U.S.A.
SERIES OR ASSEMBLY NUMBER:
YEAR INTRODUCED: 1965
YEAR DISCONTINUED: 1965
ENGINE DISPLACEMENT: 3.55 cu. in. (58.2 cc )
NUMBER OF CYLINDERS: 1
CYLINDER BORE: 1.8125 in. (46 mm)
PISTON STROKE: 1.375 in. (34.9 mm)
CYLINDER TYPE: Aluminum with chrome plated bore
INTAKE METHOD: Reed valves
MANUFACTURER ADVERTISED H.P.: not advertised
WEIGHT : 13 lbs. 14 oz. (6.3 kg)
OPERATOR CONFIGURATION: One Man operation
HANDLEBAR SYSTEM: Rigid
CHAIN BRAKE: none
CLUTCH: Centrifugal
DRIVE TYPE: Direct
CONSTRUCTION: Die cast magnesium
MAGNETO TYPE: Phelon or Wico breaker point system on early versions, solid state ignition on later production
CARBURETOR: Tillotson HS-4D, 142A
Walbro SDC
Zama
MAJOR REPAIR KIT: RK-23HS for Tillotson
K10-SDC for Walbro
MINOR REPAIR KIT: DG-5HS for Tillotson
D10-SDC for Walbro
AIR FILTER SYSTEM: Cellulose fiber element
STARTER TYPE: Homelite automatic rewind
OIL PUMP: Automatic with manual override
OPERATING RPM: 6,000
IGNITION TIMING: 30 degrees before TDC. Mount stator plate as far clockwise as it will go on breaker point types
BREAKER POINT SETTING: 0.015 in. (0.38 mm)
FLYWHEEL/COIL AIR GAP: Position is fixed
SPARK PLUG TYPE: Champion CJ6
SPARK PLUG GAP: 0.025 in. (0.63 mm)
CRANKSHAFT MAIN BEARINGS: Caged needle roller
FUEL TANK CAPACITY: 24.2 oz. (716 ml)
FUEL OIL RATIO: 32:1 with Homelite oil
RECOMMENDED FUEL OCTANE: Regular
MIX OIL SPECIFICATION: Homelite chain saw mix oil
CHAIN PITCH: 3/8 in.
CHAIN TYPE: Homelite also Oregon 72
BAR MOUNT PATTERN: 14 link
SHORTEST GUIDE BAR SUPPLIED: 16 in. (40 cm)
LONGEST GUIDE BAR SUPPLIED: 24 in. (61 cm)
COLOUR SCHEME: Homelite Red enamel
PAINT CODES:
ILLUSTRATED PARTS LIST:
SERVICE MANUAL:

——————————————————————————–
COMMENTS:

——————————————————————————–

]]>