what type of oil do i use in my mcculloch 310 chainsaw?

Comments

3 Responses to “what type of oil do i use in my mcculloch 310 chainsaw?”
  1. cronos51101 says:
    August 7, 2009 at 9:37 am

    Any two stroke small engine fuel mix will work with your saw. As far as your oil tank, any bar and chain oil will do. please note that chainsaws typically have a little hole near the tip of the bar where the wheel is. You will want to get a little grease gun with a little tip that will inject grease into this hole to keep that wheel well lubricated.

  2. LK96843 says:
    August 7, 2009 at 9:37 am

    You use gas mixed with 2 cycle oil in the motor and barr and chain oil in the oil spot for the chain.

  3. badbill1941 says:
    August 7, 2009 at 9:37 am

    It should tell in your users manual. Generally chain saws use 40-1 oil to be mixed with the gas, and a chain oil. Both can be picked up at a lawnmower shop, or a home center.


 
Powered by WordPress Lab